Portable Time Domain Reflectometer Cable Fault Locator

Toronto,Canada - GAO Instruments (www.GAOInstruments.com) offers its easy-to-use (TDR)Cable Fault Locator, which is used to locate radio frequency (RF) cable faults such as short circuits, open circuits, high resistance joints and splices.


Toronto,Canada - GAO Instruments (www.GAOInstruments.com) offers its easy -to -use (TDR)Cable Fault Locator, which is used to locate radio frequency (RF) cable faults such as short circuits, open circuits, high resistance joints and splices. The cable fault locator determines cable faults by transmitting an electrical pulse that propagates with specified speed depending on the cable type.Upon analysis,it automatically displays the fault type and the distance of the fault.
The potable TDR cablefault locator,model A0500006, has a maximum test range of 1200 meters. It features compact and rugged design, high test accuracy and stability and simple operation.The optimized cable fault locator ships with two 1.2V/1.2Ah NiMH batteries and a measurement detector.By connecting the detector to 100m standard cables, the device is able to calibrate cable type following a few simple steps as indicated on the screen.
Please visit http://www.GAOInstruments.com for more information or to purchase this product online.
For any sales inquires please contact:
1 -877 585 -9555 ext. 601 - Toll Free (USA & Canada)
1 -416 292 -0038 ext. 601 -All Other Areas
sales@gaoinstruments.com
About GAO Instruments
GAO Instruments (www.GAOInstruments.com) is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.