Plug -in Fixed Attenuators Optimized for Doped Fiber Technology

Toronto, Canada - GAO Fiber Optics (www.GAOFiberOptics.com) has announced the availability of its plug-in fixed attenuators, a series of electronic devices that reduce the amplitude, or power, of a signal without appreciably distorting the waveform

Toronto, Canada - GAO Fiber Optics (www.GAOFiberOptics.com) has announced the availability of its plug -in fixed attenuators, a series of electronic devices that reduce the amplitude, or power, of a signal without appreciably distorting the waveform. The attenuator introduces an in -line fixed loss that can reduce the source power to an acceptable detection level. This attenuator is designed for use in or with telecommunication networks, optical fiber CATV, measuring instruments, local area networks, optical fiber sensors and optical fiber to household systems. It is also deployed to lower voltage, dissipate power and to improve impedance matching.

These plug -in fixed attenuators are optimized for doped fiber technology and manufactured with various specifications such as different connector types and end face configurations. The easy -to -install electronic units feature stable environment performance, high return loss and low insertion loss. They work at wavelengths from 1260nm to 1620nm with a maximum handling power of 1W. The attenuation level in dB ranges from 0dB to 20dB at 1dB intervals.
Visit http://www.GAOFiberOptics.com for more information or to purchase this product online.
For any sales inquires please contact:
1 -877 585 -9555 ext. 601 - Toll Free (USA & Canada)
1 -416 292 -0038 ext. 601 - All Other Areas
sales@gaofiberoptics.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.