Portable Datacom Analyzer Suitable for on -the -Spot Measurements

Toronto,Canada - GAO Instruments (www.GAOInstruments.com) has rolled out a handheld datacom analyzer.


Toronto,Canada - GAO Instruments (www.GAOInstruments.com) has rolled out a handheld datacom analyzer.The cost -effective and practical analyzer is commonly used to verify the quality -of -service of datacom transmission channels in access networks, transmission networks, digital data networks and private communication networks. It is an ideal tester for R&D,production, equipment installation, acceptance testing, daily maintenance and service verification. Its handheld, durable design and simple operation make it suitable for on -the -spot measurements.
GAO Instruments'datacom analyzer, model A0300009, monitors and controls handshaking signals and supports measurements of error blocks and clock slips. The datacom analyzer supports V.24, V.35,V.36,X.21, RS -449, RS -485,EIA -530 and EIA -530A interfaces and can be configured to DTE or DCE and ASYNC or SYNC mode.In SYNC mode, the Rx and Tx clock sources are either internal or external and triggered with rising or falling edge detection.The advanced analyzer has a large memory capacity and stores up to four groups of test results; the test results can be uploaded to a PC via a serial port.Test Manager™ software is included to support further analysis,assembling, filing, and reporting of test results.In addition, the embedded software has the ability to upgrade the analyzer's functions via the serial port.
Visit http://www.GAOInstruments.com for more information or to purchase this product online.
For any sales inquires please contact:
1 -877 585 -9555 ext. 601 - Toll Free (USA & Canada)
1 -416 292 -0038 ext. 601 - All Other Areas
sales@gaoinstruments.com
About GAO Instruments
GAO Instruments (www.GAOInstruments.com) is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.