ATLONA TECHNOLOGIES FEATURES NEW PROFESSIONAL 8X8 DVI MATRIX SWITCH, THE AT -DVI0808, AT CEDIA '09

Atlona Technologies, solutions based manufacturer of Audio Video and HDMI products, showcases new Professional 8x8 DVI Matrix Switcher, AT-DVI0808, at CEDIA Expo '09

The AV market is beginning to see digital matrix switches with a greater number of inputs and outputs; however early DVI switcher adopters were limited to 4x4 and larger solutions were extremely expensive and very complicated to use. Atlona Technologies, a solutions based manufacturer of AV and HDMI connectivity products, has built a new line of Professional DVI switchers based on the same technology that all other Atlona Pro switchers (such as RGB and VGA) were built on. Atlona is excited feature these four new matrix switches designed specifically to route DVI signals at the CEDIA Expo '09 in Atlanta, Georgia. The first of these products, the AT -DVI0808, is an 8x8 DVI matrix switch geared for video wall and small scale digital signage. This unit is also available with audio (model: AT -DVI0808 -A).


This rack -mountable digital matrix switch is designed to be controlled through RS -232, with the included software, from any computer or via third party control systems such as Crestron or AMX. The unit also features an Ethernet port that allows control through a network as well. The DVI0808 showcases an EDID learning function that shortens switching speed considerably and maintains the digital "handshake" between source and display. With Atlona's DVI0808 users will never experience signal loss, degradation due to signal routing, or dropping picture on one source when switching video on another. Not only can this unit support High Resolutions up to 1920x1200, but the Atlona DVI Switchers are featured with re -clocking technology which allows a use of long cable runs on both the inputs and outputs.

With a low MSRP of $3,999, the AT -DVI0808 provides the most flexible and cost effective solution in the market for users routing high definition from any 8 DVI sources to 8 High Definition DVI compatible displays simultaneously. This unit is perfect for broadcast rooms, multi council -chambers, television teaching rooms and command center application where multiple DVI monitors are required. Atlona builds each unit per order adding features such as Audio or additional TC/PIP support as needed.

Atlona's AT -DVI0808 DVI Matrix Switchers are currently available for order and ship within 2 weeks from time of purchase.







Atlona Technologies is a registered trademark of Lenexpo Inc. in the United States and/or other countries.
The names of actual companies and products mentioned herein may be the trademarks of their respective owners.

For more information, press only:

Marketing Manager:
Joshua Carlson, (408) 954 -8782 ext 123, JCarlson@atlona.com


For more information, sales only:

Western Regional Sales Manager:
Gilbert Serrano (408) 954 -8782 ext 114, GSerrano@atlona.com

Central Regional Sales Manager:
Ron Kasmarsik (408) 954 -8782 ext 227, Ron@atlona.com

Eastern Regional Sales Manager:
Kevin Billingsley (408) 954 -8782 ext 122 Kevin@atlona.com




For more information on Atlona Products:
http://www.atlona.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.