Gefen Extender for HDMI v1.3 Over One CAT -6a Cable Makes Extending HDTVs and Projectors at 1080p/60 Easy and Economical

Its small form factor (each box measures one-inch high by three-inches wide) further improves the installation process by eliminating bulky equipment in the viewing area. It comes with two external power supplies and a set of wall mounting brackets.


CHATSWORTH, CA - Connectivity solutions provider Gefen today announced the availability of its improved version of the Extender for HDMI v1.3 over One CAT -6a cable.

This sender/receiver system delivers high definition video at 1080p full HD with up to 12 bit deep color support up to 175 feet (53m) in length using just one shielded CAT -6a cable. Resolutions at 1080i/60 can be extended even further up to 250 feet (76m). All HDMI v1.3 features are supported including lip sync audio, Dolby TrueHD and DTS Master Audio.

With this extender, installers can cut cable costs by half as previous solutions required the use of two CAT -5 cables to reach the same distance. WDisplays mounted on walls or projectors installed on the ceiling can receive their HDMI signal from a source located in a rack mounted area or closet. At the 175 foot extension length, the system can accommodate most large conference rooms, retail or entertainment spaces.

"This extender was designed to offer professionals a reliable alternative to the use of two CAT -5 cables," said Hagai Gefen, president and CEO, Gefen Inc. "If a building is already wired with one CAT -5 cable, installers can tap into the existing infrastructure at a shorter distance and avoid new cable runs. But with one CAT -6 cable, this system will streamline the installation even further and extend the range of extension."

The Gefen Extender for HDMI v1.3 over One CAT -6 works with all high definition devices available today, including set -top boxes and gaming systems, as well as flat panel displays and projectors using the HDMI format. Support for HDCP compliance ensures it will work with protected content on Blu -rays and other DVD devices.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.