Bowers & Wilkins Bows New In -wall Subwoofer

B&W Loudspeakers, the British manufacturer recognized internationally as one of the world's leading sources of loudspeaker technology, is proud to introduce a new best-in-class in-wall subwoofer, the ISW-4.

North Reading, MA -August 2009 - B&W Loudspeakers, the British manufacturer recognized internationally as one of the world's leading sources of loudspeaker technology, is proud to introduce a new best -in -class in -wall subwoofer, the ISW -4.


According to Doug Henderson, VP of Sales and Marketing. "B&W engineering has been working on an in -wall subwoofer design for quite some time. Why the long wait, you may ask? Sticking a woofer in a wall doesn't seem that hard after all…and there are many poorly executed designs testifying to this fact. Creating an in -wall subwoofer that meets B&W's high standards for performance yet is visually unobtrusive and easy to install, however, is a much bigger challenge."

In -wall subwoofers have become an important segment of custom installation projects, as homeowners and/or their interior designers often don't want speakers or electronics "detracting" from the interior design. However, they can be sold on good sound, especially where it matters most, in a home theater or main music room. Unfortunately, most in -wall subwoofers under perform due to inadequate driver design (what works in a conventional enclosure is not ideal for the requirements of an in -wall subwoofer) or from a lack of optimized EQ/amplification or from a substandard enclosure.

Enter B&W's new ISW -4. This project was led by Dr. John Dibb -designer of many of B&W's flagship products such as the Signature Diamond and the Signature 8NT in -wall -at the renowned Steyning Research Establishment in the UK.
- over -

Dibb made numerous trips to the U.S. during the course of his research and the dealers he visited provided valuable feedback. After two years of effort, B&W believes the ISW -4 to be the finest in -wall subwoofer available. It is no shallow claim -although it features a shallow enclosure, fitting 2" x 4" stud bays!

There are several reasons for this incredible performance. First, the ISW -4 features dual B&W designed long -throw, eight -inch bass drivers utilizing Kevlar®/paper cones which are many times the cost of ordinary cones. Kevlar has long been a B&W hallmark for its superb distortion -reducing qualities. For bass applications, the combination of Kevlar and paper fibers creates a non -resonant cone that is also extremely stiff and light weight, ideal for fast, deep, clean bass performance. In fact, the ISW -4 produces substantial bass down to a very low 17 Hz ( -6dB EQ at A setting on the SA -250.) Just as importantly, the solidly braced BB -ISW -4 MDF backbox prevents wall shake and cabinet distortions that plague other designs. This is an in -wall sub that can be played hard and yet doesn't cry. Nothing is more annoying than a sub that rattles!

The ISW -4's superior sound quality is also due to the dedicated SA250 mono power amplifier/crossover. The SA250 is the perfect match to achieve the utmost performance from the ISW -4, with its 250 watts of power and an audiophile grade electronic crossover built in. The crossover is a 4th order Linkwitz -Riley with adjustable increments from 40Hz - 140Hz. Features also include a low -pass filter defeat, 0/180 degree phase switch, 3 -position bass extension switch, movie/music EQ switch, and an On/Auto/Standby switch. Amplifier inputs and outputs include XLR and RCA line in and link out. There is also a 3.5 mm jack for 12 V trigger on/standby, equalization, and movie/music. The cabinet is a 2U height (3.5") for standard rack mounting.

The ISW -4 is finished in a semi -matt white suitable for custom painting. The grille is the same size as the CWM -8180 (cut -out dimensions 19.1" H x 10" W), which is to say quite compact for a high performance in -wall sub.


There is a pre -mount kit available for new construction, as well as the MDF back -box to optimize cabinet volume for the drivers and reduce acoustic bleed -through to other rooms. Use of the BB -ISW -4 backbox is strongly recommended. The ISW -4 is another best -in -class product from Bowers & Wilkins.

Availability - August 2009
Suggested system retail including SA250 amplifier - $ 2,000 (ISW -4 subwoofer - $800 each, SA -250 amplifier/crossover - $1,000 each, BB -ISW -4 Back -box - $200 each).
About Bowers & Wilkins
Bowers & Wilkins (B&W) is Britain's leading exporter of loudspeakers, and is also the number -one imported brand in North America. Since 1966, B&W's "Quest for Perfection" has resulted in a succession of technical loudspeaker innovations that have satisfied the world's most demanding listeners. B&W's rave reviews and universal acceptance as the monitor for classical music recordings have helped B&W become the dominant premium loudspeaker company throughout the world.

For additional information visit www.bowers -wilkins.com

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.