Atlona Technologies Releases the AT -DP200, DVI to Mini DisplayPort converter for Nearly Every Mac on the Market

Atlona Technologies releases DVI to Mini DisplayPort converter designed to allow use of new Mini-DisplayPort enabled monitors (such as Apple 24'') on DVI machines

Apple users who purchased their computers before 2009 are running into a wall when considering purchasing an Apple Cinema 24'' or any of the new Mini DisplayPort monitors. Mac forums all over the internet are buzzing with angry users all trying to verify if DVI is not compatible with Mini DisplayPort. DVI is not capable of putting out DisplayPort signal, making it impossible to use any of the new displays offered by manufacturers such as Apple, Dell, CinemaView with DVI computers. Going from Mini DisplayPort to DVI is simple, and many products are already on the market that allow this conversion, however there are no products on the market that allow the opposite conversion, until now.


Atlona Technologies has recently developed the first and only conversion box that will convert DVI to Mini DisplayPort while maintaining the displays optimal resolution and HDCP compatibility. Atlona's new AT -DP200 inputs DVI and outputs Mini DisplayPort signal while passing along all EDID and HDCP information. This device converts while allowing your computer to scale to the optimal resolution offered by your display including 1920 by 1200 or 1280 by 800. The AT -DP200 was put through extensive testing in Apple's compatibility lab, putting it up against every single Apple computer with a DVI port, and every monitor featuring Mini DisplayPort. Atlona Technologies also put this product through PC interoperability testing with all standard DVI video cards. This device will allow use of any Mini Display port product with and DVI graphics card, meaning the new 24" Cinema Displays from Apple can be used by users with legacy Macs.

Atlona Technologies manufactures solutions based connectivity products. They are among the leading manufacturers of audio video accessories and converters in the US. Atlona's full product line covers almost every conceivable solution that one may face in any AV system. "This new product will boost Apple sales for their 24 inch monitors," says Atlona Product Manager Michael Khain, "where users who purchased before the format change were previously unable to upgrade to the cinema display, now with this new converter their market just got that much bigger."

The new AT -DP200 DVI to Mini DisplayPort falls right in line with the rest of the bleeding edge products designed to keep the AV world connected. The new AT -DP200 will start shipping mid of September with an MSRP of S179.00.

#########
For more information, press only:

Marketing Manager:
Joshua Carlson, (408) 954 -8782 ext 123, JCarlson@atlona.com


For more information, sales only:

Western Regional Sales Manager:
Gilbert Serrano (408) 954 -8782 ext 114, GSerrano@atlona.com

Eastern Regional Sales Manager:
Kevin Billingsley (408) 954 -8782 ext 122 Kevin@atlona.com

Central Regional Sales Manager:
Ron Kasmarsik (408) 954 -8782 ext 227, Ron@atlona.com


For more information on Atlona Products:
http://www.atlona.com

Featured Product

VMP EREN-42E1K 19-inch Equipment Rack Enclosure

VMP EREN-42E1K 19-inch Equipment Rack Enclosure

Now shipping, the new 42 rack space EREN-42E1K 19-inch Equipment Rack Enclosure is newest and largest member of VMP's EREN Series. "The EREN Series has been designed for use with a multitude of security, audio, video, and communication components, and the EREN-42E1K is a sizable upgrade in both depth and weight capacity to our popular EREN-42E 19-inch equipment rack enclosure," explained Keith Fulmer, president of VMP. "The EREN-42E1K has a usable depth of 33 inches and a durable load capacity of 1,300 lbs. (a 30 percent increase from the EREN-42E) to fit just about any and every need." The cost-effective, portable, and fully welded EREN family of 19-inch equipment rack enclosures has been designed for installations where protected components are a necessity. The EREN Series, which comes complete with integrated cooling fans and lockable, removable side panels (with optional locks) allows for the organization of multiple electronic components, while at the same time protecting them from thermal issues, as well as damage or theft. Additional EREN Series specifications include: works with all standard 19-inch rack equipment and accessories; rails threaded with standard 10-32 threading; tempered glass front door; double swing steel rear door; adjustable front and rear rails; vented top and bottom; top and bottom cable routing knockouts; reversible hinged front and rear door; casters and leveling feet; ships assembled; EREN-42E1K MSRP: $1,499.00