Video Surveillance IP Server Transfers Existing Analog Systems to Network

iRes Technology's 4 Channel IP Video Server converts 4 Analog Video signals and 1 Audio signal to a Digital format, thus enabling remote surveillance

IRES Technology's new 4 Channel IP Server allows you to connect four legacy analog cameras to the internet for remote monitoring in real -time. The signals from 4 analog video sources are converted to digital format using a Dual Codec MPEG4/MJPEG compression, enabling transmission over a TCP/IP network. One audio input is also available for synchronization with video.

Select between QUAD mode for remote viewing of 4 cameras at 30 fps, or MUX mode for Multiplexed streaming at 15 fps. The device has a built -in Web Server, making it easily accessible from any browser by simply typing in the IP address. DDNS is also supported.
Recording can be configured via multi -zone motion detection or set scheduling. The SD Card slot allows for convenient storage and files can be easily transferred to PC using a USB connection. The system also supports a wide variety of PTZ cameras via RS -485 connection, plus I/O for sensors and alarms.
For more information, please visit:

Featured Product

PureLink - HCE II Tx/Rx - 4K HDMI over HDBaseT Extension System

PureLink - HCE II Tx/Rx - 4K HDMI over HDBaseT Extension System

The HCE II 4K HDMI over HDBaseT Tx/Rx Kit provides an accessible, easy-to-install solution for extending HDMI video and embedded audio over long distances using a single CATx cable. The HCE II supports full 3D content and extends uncompressed HDCP- protected HDMI content and embedded lossless audio formats with bi-directional control signals (IR) up to 230 feet (70m) at 1080p and up to 130 feet (40 meters) at 4K/Ultra-HD resolutions.