Atlona Technologies adds to their Lynx CAT Series with the release of their new HDMI Extenders over single Cat5/6

Atlona Technologies releases new line of HDMI Extenders over CAT5/6 for their Lynx CAT Series, designed to transfer HDMI & Audio signal over cost effective CAT5 cable.

Atlona Technologies will release the newest addition to their Lynx CAT Series with two new HDMI Extenders over single CAT5/6. First off is the AT -HD50RSL; Atlona's HDMI extender over single Cat5/6 receiver unit with LAN Loop -Out, which works perfectly with its counterpart (the AT -HD50SS). The AT -HD50SS transmitter unit runs HDMI over single CAT5/6 with local video output.


These Atlona HDMI over Single CAT5 extenders provide the perfect solution for extending HDMI signal to different HD Displays over long distances. These units can run lengths up to 200ft and will support resolutions up to 1080p with absolutely no signal degradation. These devices are cascadable, meaning they also have the ability to transfer Audio and HDMI Video signals over CAT5 from source to display by "daisy chaining" units for massive deployments in excess of 300 displays. Simply put, these extenders are the most cost effective and convenient way to transfer HDMI signal past the limits of straight cable from source to display.

Atlona's AT -HD50SS and AT -HD50RSL are also compatible with the AT -HDRS and AT -HD19SS. These new extender units are currently available for pre -order and will be ready for purchase April 18th.

AT -HD50SS: MSRP $249.00
AT -HD50RSL: MSRP $219.00



Atlona Technologies is a registered trademark of Lenexpo Inc. in the United States and/or other countries.
The names of actual companies and products mentioned herein may be the trademarks of their respective owners.

For more information, press only:
Joshua Carlson, (408) 954 -8782 ext 123, JCarlson@atlona.com

For more information, sales only:
Gilbert Serrano (408) 954 -8782 ext 114, GSerrano@atlona.com

For more information on Atlona Products:
http://www.atlona.com

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.