OmniMount Expands Motorized Product Offering

New automated cantilever mount allows users to adjust screen position from anywhere in the room via remote control and supports most large flat panels.

Phoenix, AZ - December 16, 2008 - OmniMount, the global leader in consumer and commercial A/V mounting and furniture solutions, today introduced the Power55 motorized flat panel mount. This new large remote controlled cantilever mount is the latest addition to the company's wildly successful MotionPicture Series and augments the company's automated product offering.

The Power55 was designed as an expansion of the current product line to accommodate most 37 -inch to 55 -inch flat panels up to 110 pounds. Just like the other products in the award -winning MotionPicture Series, the Power55 enables the viewer to tilt, pan and swivel a flat panel with the touch of a button, allowing for maximum viewing flexibility from anywhere in the room.
The mount features a whisper -quiet 45 dB motor, universal rails that accommodate virtually any flat panel, and remote controlled operation for unparalleled convenience.

"Our entire MotionPicture Series provides our consumer and commercial partners with step -up solutions for enhancing their customers' viewing experiences," said Brett Stenhouse, vice president of marketing at OmniMount. "Automated mounts offer a unique convenience to today's home theaters. With the addition of the Power55, OmniMount partners now have a full range of automated mounting solutions to offer their customers."

The Power55 tilts up to 15 degrees for glare reduction and pans 20 degrees left and right to allow viewing from more than one room. Remote controllable via IR (two memory) and RS -232 (three memory) programmable positions, it enables the user to save presets and sits a mere 2.9 inches from the wall when resting in the home position. To ensure safety, the Power55 features programmable wall detection, as well as safety mechanisms that stop motion when movement is obstructed. As with every MotionPicture Series mount, installers can expect open architecture for easy access to in -wall wiring, an installation template and level, as well as OmniMount's exclusive Lift n' Lock™ design for easy installation.

OmniMount's Power40, launched in September as part of the MotionPicture Series and previously sold as the Motion40, has been a successful extension to the line. The Power40 is a medium remote controlled cantilever mount that fits most flat panels with screen sizes from 23 inches to 40 inches and weighing up to 66 pounds. It sits just 2.7 inches from the wall when in the fixed position, tilts from zero to 15 degrees to reduce glare, and pans from zero to 20 degrees left and right to accommodate most any viewing position. The Power40 is equipped with all the same safety features as the Power55 and as a single -stud mounted product, is an even quicker install.

The Power55 is available now at an aggressive MSRP of $599.95. The Power40 is also available now for $399.95. Both are available at retailers nationwide.

For more information about OmniMount, please visit If you would like to see videos of the Power55 in action, go to -release.php?id=2138
About OmniMount
OmniMount is a global leader in the design and manufacturing of A/V mounting and furniture solutions for residential home entertainment and commercial applications. A perennial innovator, OmniMount has set industry standards for over three decades with groundbreaking in -house design and engineering, premium quality and unsurpassed reliability. Whether it's a small speaker, a large flat panel display, or anything in between, OmniMount has the right mounting solution for every job. Based in Phoenix, Arizona, OmniMount currently is represented in more than 65 countries.

Press Contact: Caster Communications, Inc. at 401.792.7080
Katie Short
Lauren Simmen
For digital images log on to

Manufacturer Contact: OmniMount at 480.829.8000
Kimberly Fabiano

Featured Product

Octava -4K UHD Video Over LAN Matrix Switch. Video Wall Processor

Octava -4K UHD Video Over LAN Matrix Switch. Video Wall Processor

The Octava PRO DSX is a simple to use, powerful video distribution solution designed to deliver HD video including 4k UHD from multiple sources to multiple displays. The PRO DSX also functions as a Video Wall processor to create n x m video walls. The PRO DSX delivers HD video over standard CATx LAN cables allowing for simple integration in virtually any infrastructure. The PRO DSX was specifically designed for ease of use for residential installations and engineered for scalability to accommodate large video distribution systems such as education, corporate , and hospitality applications. Easy to configure and customize for your video system - Build virtually any size video matrix switch system. The Pro DSX is a scalable platform enabling easy system growth. Simply add PRO DSX TX for each video sources required and a PRO DSX-RX per display. Video Wall Support- The PRO DSX features a built-in video wall processor that enables you to create custom video walls.