AudioSource®'s New Award -Winning Two -Channel and Subwoofer Amps Now Shipping

The AMP102, AMP110, AMP210, and AMP310 2-Channel Amps and the AMPSUB210 Subwoofer Amp Round Out AudioSource's Complete Line of Affordable Yet Versatile and Performance- Driven Home Audio Electronics

PORTLAND, Ore., Dec. 9, 2008 - AudioSource® is proud to announce that its complete line of new, award -winning two -channel and subwoofer amplifiers are now shipping. The AMP102, AMP110, AMP210, and AMP310 two -channel amps and the AMPSUB210 subwoofer amp round out AudioSource's complete line of affordable yet versatile and performance -driven home audio electronics.

"Our new AudioSource amplifiers have 20 years of tremendously successful design and engineering history behind them, coupled with the addition of the latest available technologies," explained Stewart Millager, AudioSource director of engineering. "These new amps are ideal for use in audio and home theater systems where power and performance are desired to push passive speakers and subs to their limits so they, too, perform at their best."

AMP310, AMP210, and AMP110 include Triple -Darlington power amplifier stages with complementary 15A bipolar output transistors and high -current, low -distortion drive for complex real -world loudspeaker loads. Their fully symmetrical power amplifier topology is a dual -differential error amplifier with circuit linearity that preserves signal integrity and selectable mains voltage with IEC mains inlet for use in worldwide markets.

Common AMP102, AMP110, AMP210, AMP310, and AMPSUB210 features include:
• Black anodized brushed aluminum faceplate
• Line 2 auxiliary output
• SN Ratio: 100dBA
• Front panel level and balance controls
• Signal sensing "Power On" & 12VDC "Trigger On"
• Rackmount ready (optional)

Features of the 2 -Channel AMP310 include:
• 8 Ohm Stereo: 150W
• 4 Ohm Stereo: 225W
• 8 Ohm Bridged: 450W
• MSRP: $899.99

Features of the 2 -Channel AMP210 include:
• 8 Ohm Stereo: 90W
• 4 Ohm Stereo: 125W
• 8 Ohm Bridged: 250W
• Speaker A/B switching
• MSRP: $699.99

Features of the 2 -Channel AMP110 include:
• 8 Ohm Stereo: 75W
• 4 Ohm Stereo: 110W
• 8 Ohm Bridged: 250W
• Speaker A/B switching
• MSRP: $449.99

Features of the 2 -Channel AMP102 include:
• 8 Ohm Stereo: 50W
• 4 Ohm Stereo: 75W
• 8 Ohm Bridged: 150W
• Speaker A/B switching
• MSRP: $249.99

Features of the AMPSUB210 subwoofer amplifier include:
• 8 Ohm Stereo: 200W
• 4 Ohm Stereo: 300W
• Provision for subwoofer -specific equalization module
• MSRP: $699.99

Due to continual product improvement, pricing and specifications subject to change without notice.

Rodin is located at 9200 North Decatur Street, Portland, Oregon, USA 97203. For more information, please call 503 -978 -3321, or visit

Rodin is a Portland, Oregon -based company established in 1985 that designs and develops high quality high -performance products for the custom install home and the mobile audio markets. The company markets its products under the Phoenix Gold, AudioSource and Carver brands.

# # #

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.