New Gefen Switcher Supports HDMI v1.3 Devices

The 3x1 HDMI v1.3 Switcher Gives Always-On Access to Three High-Def Sources from One HDMI Display

CHATSWORTH, CA - Anyone who's ever tried to connect a Blu -ray player, set -top box and PlayStation 3 to the single HDMI input on a high definition display will appreciate Gefen's new 3x1 HDMI v1.3 Switcher. This black, rack -mountable solution comes equipped with three HDMI inputs and one HDMI output, allowing users to switch between all three sources using the switcher's IR remote. CEC source switching is fully enabled, while 1080p full HD resolutions are delivered instantly for each source, when selected.


Users have immediate, non -stop access to all three sources using the same high definition HDMI display or projector equipped to handle the next generation HDMI v1.3 format. This enables additional features like Dolby TrueHD and DTS Master audio with audio lip sync for the most engaging hi -def viewing experience available today.

Even better, the Gefen 3x1 HDMI v1.3 Switcher (MSRP $299) is simple to install and operate. Users connect up to three HDMI sources to the Switcher's inputs, and their HDMI display or projector to the Switcher's output. Three quality HDMI cables are included to connect the sources to the Switcher. An external power supply drives switching performance, which may be controlled by the Gefen IR remote or local, front -panel button.


Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.