Atlona Technologies' 4x4 HDMI Matrix Switches are now 1.3 compatible (AT -HDMI -44M). See them at EHX 2008!

As more and more products adopt the newest HDMI standard of 1.3, Atlona technologies has made a bold move, replacing their stock of 4X4 matrix switches with switches which implement a new chip set making them fully HDMI 1.3 compatible.

These switches feature a RS -232 control port, and have a full command set available online. Where most manufacturers charge extra for these feature, Atlona's 4x4 matrix switches will retain the same low MSRP of $1099.

Atlona was one of the first manufacturers to introduce a 1.3b certified HDMI cable over a year ago. They now have set their sights on updating their entire product line to be capable of surpassing HDMI 1.3 standards.

General HDMI specifications require enough bandwidth to support all current HDTV formats. HDMI 1.3 increases that bandwidth to 10.2 Gbps (225 MHz) giving the ability to support higher resolutions, such as 1440p, deep color, and higher frame rates. When HD content progresses to the next step, these units will make the transition seamlessly.

For more information about the all new HDMI 1.3 4X4 Matrix Switches by Atlona Technologies (AT -HDMI -44M) visit:
http://www.lenexpo -Atlona -HDMI -Matrix -Switch -HDMI -1.3 -p -17379.html

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.