Analog Stereo Audio Distribution Amplifier Available from TV One

The 1T-DA-124 is actually two audio distribution amplifiers in one and will support analog stereo with four outputs on 3.5mm Mini-Stereo connectors or four S/PDIF outputs via RCA coaxial connectors.

ERLANGER, KY, September 24, 2008 - TVOne -task's 1T -DA -124 is actually two separate analog audio distribution amplifiers in one case. It consists of a 1x4 Analog Stereo Distribution amplifier via 3.5mm Mini -Stereo connectors and a 1x4 S/PDIF Distribution Amplifier via RCA coaxial connectors. Inputs between the two amplifiers do not cross over and there is no Analog -Digital conversion between the two. The unit is now shipping and has a suggested retail price of $135.


The 1T -DA -124 has an audio bandwidth of 20Hz to 20 KHz and the signal processing system ensures a low signal to noise ratio plus flat equalization curves throughout the band pass spectrum. Impedance is 20KΩ for Analog Stereo signals and 75Ω for S/PDIF signals. Analog signal levels are Unity Gain. S/PDIF levels are unity and may be from 0.5 to 1.0 Vp -p.

The Distribution Amplifiers can be cascaded for expanded functionality. An optional Rack Mounting kit provides for mounting either one or two units.

For more information, contact TV One. To download an accompanying image suitable for publishing along with this news release, please use the following link which will take you to the TV One Product Photo web page: http://www.tvone.com/press_photos.shtml and scroll down to 1T -DA -124.
From TV One, 1350 Jamike Drive, Erlanger, KY, 41018, 800 -721 -4044, 859 -282 -7303, http://www.tvone.com.
#####
Founded in 1991, TV One specializes in video, audio and multimedia processing equipment, based on its proprietary CORIO video conversion technology. Centrally located in Erlanger, KY with offices across the globe, TV One manufactures a complete line -up of products for the professional and broadcast video market.


Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.