MuxLab VGA 4 -Port Hub Supports Plug -& -Play and Remote Power Pass -Thru

Montreal, Canada - MuxLab Inc (www.muxlab.com), designer and manufacturer of security video and audio-video connectivity solutions for copper twisted pair, announces its latest addition to its AV connectivity portfolio…The VGA 1x4 Hub (500150).

MuxLab VGA 4 -Port Hub Supports

Plug -& -Play and Remote Power Pass -Thru

Up to 600 ft (180m) via Cat5E/6 @ 1920 x 1440/1080p

Montreal, Canada - MuxLab Inc (www.muxlab.com), designer and manufacturer of security video and audio -video connectivity solutions for copper twisted pair, announces its latest addition to its AV connectivity portfolio…The VGA 1x4 Hub (500150).

Developed for the commercial PC/server market, the VGA 1x4 Hub allows one (1) VGA (RGBHV) source to be distributed to up to four (4) displays via Cat5E/6 cable for more cost -efficient cabling. The hub works in conjunction with the Active VGA Balun II Kit (500140) and Active VGA Balun II Receivers (500142). At least one (1) 500140 is required to support one (1) display. Up to three (3) additional 500142 may be added to support up to three (3) additional displays.

The VGA 1x4 Hub is DDC -compliant for "plug -and -play" installation with laptops, PCs and custom imaging applications. At boot -up, the Active VGA Balun II Kit reads the monitor's characteristics and allows the VGA source to adjust its video output according to the display monitor's size and resolution. The product also supports Remote Power Pass -Thru up to 200 ft (61m) for more streamlined installation where additional AC power sources are not available at the monitor.

The hub may be installed anywhere between the Active VGA Balun II Transmitter and Receiver within the maximum distance specifications of the Active VGA Balun II Kit. Additionally the product also supports component video (RGB/YpbPr) when used with the appropriate VGA -to -RGB cable assemblies (not included).

The VGA 1x4 Hub streamlines cabling in applications such as: digital signage, medical imaging, video walls, classroom training and boardroom projection systems. For more information, please visit the MuxLab website (www.muxlab.com) or contact MuxLab at +1 514 -905 -0588, or videoease@muxlab.com. A 300 DPI product photo is available upon request.

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.