T1 BER Telecom Tester and Analyzer

Toronto, Canada - GAO Comm introduces its new T1 BER TESTER capable of performing both E1 and T1 tests.

Toronto, Canada - GAO Comm introduces its new T1 BER TESTER capable of performing both E1 and T1 tests.


Due to the earlier success and popularity of its E1 BER testers, GAO Comm is now presenting a newly improved tester that is capable of performing both E1 and T1 tests with additional useful features especially designed for North American users. With histogram analysis and propagation delays, this improved T1 BER tester can perform multiple tasks such as Pulse mask and E1 Jitter measurements. Not only does it support error injection and alarm generation, it is also capable of sending Frame Words such as Sa bit. In addition, the size '4' LCD display allows users to view received Data/FAS/MFAS words more conveniently than ever.

This T1 BER TESTER can perform error code testing for rates from 50b/s to 2048kb/s. It also performs 2M online monitoring making it a valuable tool for routine maintenance, repair and operation monitoring for communication devices. The supported interfaces include G.703, V.24/RS232, V.35, V.36/RS449, X.21, EIA-530/530A and RS485/RS422. The T1 BER Tester incorporates a special remote monitoring function, which enables the user to perform convenient real time monitoring through its software running in a Windows environment.

Telecom Tester and Analyzer: T1 BER TESTER - Highlights:
E1/T1 BER testing
G.703/V.35/V.36/RS449/X.21/EAI530/RS485
NX64K BER testing
ITU -T G.821, G.826, M.2100 measurement
Histogram Analysis
Propagation Delay
View Received Data/FAS/MFAS words
Error Injection/ Alarm Generation
Send Frame Word including Sa bit
Pulse Mask measurement
E1 Jitter measurement

Telecom Tester and Analyzer : T1 BER TESTER - Specifications:
E1 Framing:Unframed/PCM30/PCM30C/PCM31/PCM31C
T1 Framing: Unframed/D4/SF/ESF/SLC -96
Internal Clock:2.048MHz10ppm,1.544MHz10ppm
Line Code:HDB3/AMI/B8ZS
Test Patterns:PRBSn(n=9,11,15,20,23),User -defined 8/16bit word
Connectors:75 ohm unbalanced or 120 ohm balanced
Termination:Monitor(High impedance),Simulate(terminated),Bridged Terminated 2K
Error Injection:bit,Single/Rate
Alarm Generation: LOS,AIS,LOF,RDI
Jtter measurement:O.171/O.172

Telecom Tester and Analyzer : T1 BER TESTER - General features:

Large LCD display with backlight: size '4'
Battery operation: 5 hours Minimum.
Upgradeable Firmware: via RS232
Store Test Results and Configuration: 256 Kb RAM

For more information on this or any of Testers & Analyzers visit: http://www.gaocomm.com/telecom_tester_and_analyzer_t1_ber_tester -p -1264.html

About GAO Comm
GAO Comm is an international leading provider of communication test instruments and equipment and devices that serve the needs of communication infrastructure, installation and maintenance.

Featured Product

Video Mount Products DVR-LB3

Video Mount Products DVR-LB3

The DVR-LB3 is a low profile DVR lockbox design for 19-inch equipment racks. It is 2-post or 4-post mountable with adjusting rear flanges to accommodate a variety of rack depths. The DVR-LB3 is designed for both active or passive thermal management to accommodate whatever situation is necessary. Additional specs include interior dimensions of 17.2in. W x 21in. D x 5in H, stand alone or rack mountable with a 3 RU overall height (5.25-in.), interlocking lift off lid, multiple vents with removable vent blockers, single fan included with mounting location for second fan, key locked hinged front door, and black static resistant powder coat finish.