Atlona Releases Single CAT -5 Extender for HDMI. See it at InfoComm

New Single CAT5 Extender for HDMI economically transfers 1080p Signal up t0 125ft, and 1080i up to 250ft.

Until now, extending HDMI over CAT -5 cable has involved running two Cat 5 cables, one for the video signal, and another for the DDC information. There were a handful of single interconnect solutions using a single fiber optic and some using CAT -6 or CAT -7 cables, but most were limited to a maximum range or 60' at 1080p.


Atlona's new Single CAT -5 HDMI extender (model: AT -HDMI40SR) will extend HD signal from HDMI sources up to 200' at 1080i or 130' at 1080p. The device has a built in video equalizer, which is adjustable though a dial on the receiver. The unit is an affordable solution with a low MSRP of $329, and is now shipping. Check the New Products section on the Lenexpo website for more information.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.