TV One's Analog to Digital Audio Converter with Delay Now Shipping

The 1T-AP-216 converts Analog Stereo Audio (R&L) to simultaneously available SPDIF Optical and Coaxial Digital audio and allows up to 150ms audio delay to correct lip-sync problems

The TV One -task 1T -AP -216 Audio Converter changes Analog Stereo Audio (R&L) to simultaneously available SPDIF Optical and Coaxial Digital audio. Sampling is at 48 KHz. A special feature of the 1T -AP -216 allows the introduction of a 150ms delay into the Digital Data Stream intended to correct lip sync problems frequently present on HDTV broadcast programming.


Transmission distances of over 5m (16 ft) are possible using the Optical Output. The Coaxial Digital Output transmission distance is limited by the quality of the cables and sensitivity of the receiving circuitry. The 1T -AP -216 is immune from electromagnetic noise and is easy to install and operate. It requires an external 5VDC and an AC Adapter is provided. It has a locking DC connector for added security.

The unit is available for delivery now and has a recommended retail price of £42 (€62).

This product as well as the entire TV One product line can be viewed on their website www.tvone.eu, alternatively you can contact their European Sales and Technical Department on +44 (0) 1843 873311 or at sales.europe@tvone.com.


Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.