TV One Releases HDMI to HDMI Scaler with Audio Embedding/De -Embedding

The 1T-VS-626 is a high quality device that's ideal for situations where the HDMI source resolution and/or frame rate is incompatible with the display device's resolution/frame rate.

The latest video scaler added to the TV One -task inventory is the 1T -VS -626. It can accept audio embedded in the incoming HDMI signal or from the separate Toslink or analog stereo inputs. The HDMI output can then be scaled to the same or a different resolution. Output audio is simultaneously present embedded in the HDMI signal and separately as Toslink and analog stereo providing maximum flexibility for systems integration.


The 1T -VS -626 is both HDMI v1.1 and HDCP 1.1 Compliant. It has a maximum resolution of 1080p and WUXGA for both the input and output. It will also accept 480i or 576i SDTV resolutions. Advanced features, such as 3D Motion Adaptive De -Interlacing, 3:2 and 2:2 Pull -Down and 50/60 Frame Rate Conversion provide extremely high quality signal conversion. A comprehensive OSD menu and buttons allows selection of output resolution, adjustments of picture quality and audio source selection. It's also possible to add up to 150ms of audio delay to compensate for lip sync errors. A small inline power adapter is provided with a locking DC connector for security.

This product is available to order now and has a recommended retail price of £169 (€249).

The TV One product line can be viewed on their website www.tvone.eu, alternatively you can contact their European Sales and Technical Department on +44 (0) 1843 873311 or at sales.europe@tvone.com.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.