Atlona Technologies' 4X2 HDMI Matrix Switchers are now 1.3 compatible (AT -HDMI -42M)

Atlona gives users what they ask for, without charging them extra. Atlona entire line of HDMI matrix switchers are now 1.3 capable.

Atlona Technologies has replaced its entire inventory of 4X2 matrix switches with new HDMI 1.3 matrix switches. As more and more products adopt the newest HDMI standard of 1.3, Atlona Technologies has made a bold move, replacing their stock of 4X2 matrix switches with switches that implement a new chip set making them fully HDMI 1.3 compatible. These switches feature a RS -232 control port, and have a full command set available online. Where most manufacturers charge extra for these features, Atlona's 4X2 matrix switches will retain the same low MSRP of $849.


Atlona was one of the first manufacturers to introduce a 1.3b certified HDMI cable over a year ago. They have now set their sights on updating their entire product line to be capable of surpassing HDMI 1.3 standards.
General HDMI specifications require enough bandwidth to support all current HDTV formats. HDMI 1.3 increases that bandwidth to 10.2 Gbps (225 MHz), giving the ability to support higher resolutions, such as 1440p, deep color, and higher frame rates.

When HD content progresses to the next step, these units will make the transition seamlessly. For more information about the all new HDMI 1.3 4X2 Matrix Switches by Atlona Technologies (AT -HDMI -42M) visit:

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.