TV One -task adds RGB/YPbPr Distribution Amplifiers with Stereo Audio

The 1T-DA-472 and 1T-DA-474 are the latest addition to the TV One-task line of professional Distribution Amplifiers. They will distribute two or four RGB/YPbPr outputs with Stereo Audio at a distance up to 300 ft.

The TV One -task 1T -DA -472 and 1T -DA 474 are high -quality Distribution Amplifiers that distribute two and four RGB/YPbPr signals. They can handle video bandwidth in excess of 500MHz and computer resolutions up to 2560x1600. Both models can send signals over distances of up to 300 feet from the source, without signal deterioration, and are now available for shipping across the world.


The 1T -DA -472 and 1T -DA -474 provide VESA industry standard DDC (Data Display Channel) bi -directional communications for host control of the downstream monitors. Video Input and Output connectors are HD -15 type and 3.5mm Mini -Stereo type for audio. The audio response is 20Hz to 20 KHz.

Both units are housed in small rugged metal cases. They are 5VDC powered and a Power Adapter is included. The DC power connector is a locking type for security. For best performance at long distances, premium grade cables are recommended. Optional single or dual rackmount kits are available.

The suggested retail prices for the units are £76 (€112) for the 1T -DA -472 and £110 (€162) for the 1T -DA -474.

More information regarding these units along with the entire TV One product line can be found on the TV One website, www.tvone.eu, alternatively you can contact the European Sales and Technical Department on +44 (0) 1843 873311 or at sales.europe@tvone.com.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.