TV One -task Releases 4x4 Component Matrix Routing Switcher

The 1T-MX-3344 Matrix Routing Switcher from TV One is a high-bandwidth unit that provides four inputs and outputs of Component Video plus Stereo Audio.

TV One has added the 1T -MX -3344 Matrix Routing Switcher to its' expanding TV One -task product line. The 1T -MX -3344 is an extremely wide bandwidth, high performance unit that provides four inputs and four outputs of Component Video and Stereo Audio. The unit accommodates YPbPr HD Video or YUV (Y,R -Y,B -Y) SD Video signals, plus Analog Stereo Audio. The unit has a recommended retail price of £277 (€408) and is now available.


The 1T -MX -3344 allows any of the four inputs to be routed to a single output, multiple outputs or all outputs; a capability unique to Matrix Routing Switchers. The video bandwidth in excess of 300MHz ensures that this switcher will provide an output identical to the source signals. Resolutions from 480i through 1080p are supported.

The 1T -MX3344 may be operated by front panel buttons, IR Remote Control or via the RS -232 interface. Ears for rackmounting are also included. The unit requires external 12VDC and an AC Adapter is provided. It has a locking DC connector for added security.

This product along with the entire TV One product line can be viewed on their website www.tvone.eu, alternatively you can contact their European Sales and Technical Department on +44 (0) 1843 873311 or at sales.europe@tvone.com.


Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.