TV One -task DVI Routing Switcher with HDCP Now Available

The 1T-SX-524 is a professional HDCP Compliant DVI routing switcher that can switch up to four inputs.

The TV One -task 1T -SX -524 DVI Switcher is a compact, high performance product designed to meet the most demanding requirements for the switching of DVI signals with HDCP copy protection. The 1T -SX -524 has four inputs, and it can be controlled from the front panel input selection button or the included infrared remote control. The unit has a recommended retail price of £195 (€287).


The 1T -SX -524 has a maximum pixel rate of 165 MHz and provides resolution capabilities up to 1920x1200 and 1080p. It has DVI -I connectors for the input and outputs and is powered by an included power adapter that provides 5VDC for operation. If a conflict exists with other IR remote controls in the operational environment, the included IR remote controller can be easily reprogrammed to avoid the problem.

An LED display indicates the current input selection and the presence of DC Power. An IR Remote Receiver Option is available for applications requiring the unit to be hidden from view or when it is desirable to extend the range beyond a direct view of the unit such as around a corner.

This product as well as the entire TV One product line can be viewed on their website www.tvone.eu, alternatively you can contact their European Sales and Technical Department on +44 (0) 1843 873311 or at sales.europe@tvone.com.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.