BTX Introduces the New MaxBlox™ CD -MX915HH Half -Hood For Proper Strain Relief

BTX is building on its MaxBlox™ product line with the addition of the new CD-MX915HH half-hood.

HAWTHORNE, N.Y. ― Feb. 11, 2008 ― BTX is building on its MaxBlox™ product line with the addition of the new CD -MX915HH half -hood. Functioning as a full -size hood in a smaller footprint, the new half -hood provides installers with optimal strain relief in high -density applications for broadcast, A/V, home theater, and security.


Traditionally, when mounting a D -Sub connector to a device, plate, or panel, the only way to achieve proper strain relief has been to use a full -size hood or to tie off the wire to a rack rail using a cable tie. However, the width and/or height of the hood usually does not allow installers to mount the connectors side by side, and the depth of the hood is sometimes too long to fit behind a wall when mounted to a plate.

To solve this problem, BTX is introducing the MaxBlox CD -MX915HH half -hood, which acts as a full -size hood, but within a much smaller footprint. The CD -MX915HH is the exact same width as the MaxBlox D -Sub connector, making it ideal for any high -density application where numerous MaxBlox D -Subs need to be mounted side by side.

In addition, a small slotted tray extends out the back of the CD -MX915HH, providing the perfect place to secure the wire with a standard cable tie, for the ultimate strain relief. The CD -MX915HH works exclusively with the patent -pending BTX MaxBlox D -Sub connectors.

"We had been approached by many customers asking us to design and manufacture a solution for side -by -side mounting of our solderless DB9s on a device," said Greg Schwartz, president of BTX. "The problem, however, was not only the issue of real estate, but also strain relief. Our new CD -MX915HH half -hood offers installers an innovative solution to both problems."

The new MaxBlox CD -MX915HH half -hood is available to installers immediately.

# # #

About BTX Technologies, Inc.
BTX Technologies is the premier manufacturer and value -added distributor of professional -grade products used to interface and integrate A/V, broadcast, home theater, data, and security systems. Celebrating its 40th anniversary, BTX combines award -winning, cutting -edge solutions with unmatched technical knowledge and customer service to bring innovation and value to its customers. Call +1 (914) 592 -1800 to request a free catalog or visit BTX at www.btx.com.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.