New Gefen Extenders Offer Several Methods of Enabling Remote HDTV Performance

Based on signal distance between the source and display, users have the option of selecting coax, fiber optics or category-5 cables that work with Gefen's sender/receiver systems to deliver high definition resolutions to 1080p

When high definition video needs to travel beyond a few meters to its remote destination, Gefen offers a wide selection of HDTV extenders.


HDMI over Coax Extender

Unique and leading edge, this new system enables standard coax cables to transmit the HDMI signal. Its sender and receiver system delivers high definition resolutions to 1080p (24fps/23fps) with two channels of audio up to 300 meters in distance. Designed to enable a no -new -wires solution for delivering HDTV throughout the home, this extender instantly delivers HD video and audio. Its sender incorporates IR back channel capability for an easy control of sources from any destination.

HDMI CAT -5 MS Extender

This next generation extension system enables a consistent delivery of high definition audio and video up to 50 meters. Category -5 cables connect the sender unit at the local source to the receiver at the remote display. Complete HDMI and HDCP compliance is included along with a robust MS technology that enables HD resolutions up to 1080p with multi -channel digital audio to be delivered with no delay.

HDMI RS -232 Extender

This extension system is unique because it enables both HDMI and RS -232 signals to be extended using the same system up to 50 meters in distance. Two category -5 cables link local and remote locations and deliver high definition video up to 1080p along with RS -232 signals for smart control devices. This extender can also reach up to 100 meters at resolutions of 1080i. The system comes with both HDMI and RS -232 connector cables.


Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.