- New universal mounting brackets offer 180-degrees of horizontal adjustment for virtually any viewing angle - Each model designed to hold specific size and weight of various flat panel TVs

CHINO, CA and CES - LAS VEGAS, NV. - January 7, 2007 - K2 Mounts, an industry leader in advanced mounting solutions for flat panel displays, is introducing three new universal mounting brackets [K2 -A2 -S, K3 -A2 -S and K4 -A1 -S] for flat panel TVs during CES '08 starting today in Las Vegas.

The individual design and construction of each new mount was carefully crafted to facilitate the appropriate weight and dimensions for certain size flat panel TVs. The K2 -A2 -S is designed specifically for smaller plasma and LCD TVs ranging in size from 13 -inches to 30 -inches, or a maximum weight of 35 lbs., The K3 -A2 -S is for larger sets between 32 -inches and 45 -inches with a maximum weight of 130lbs. The K4 -A1 -S, the largest flat panel mount we have ever offered with an articulating arm, allows for the weight of 198 lbs. and is best suited for 45 -inch to 60 -inch TVs. The K2 -A2 -S replaces the K2 -A1 -S and the K3 -A2 -S is replaces the K2 -A3 -S.

Each mount is made out of solid steel construction with an elegant powder coat finish. They tilt a maximum of 15 degrees and the articulating arm offers 180 degrees of horizontal adjustment. The fluid rotation of the mount offers the end -user endless viewing configurations. Installation is easy with all the hardware included plus an integrated bubble level that insures a straight installation every time. All K2 Mounts offer a lifetime guarantee with a free $10,000 component assurance.

"These three new mounts are our most cost effective solutions, providing increased margins for our dealers," said Tony Grasso, K2 Mounts Vice President of Sales and Marketing. "The new industrial designs are incredibly sturdy and quite beautiful for wall mounting brackets, enhancing the overall appearance of a flat panel installation."

K2 Mounts can be seen in Booth # 21970 in the South Hall of the Las Vegas Convention Center during CES. The MSRP's of the three new universal mounts are as follows:
K2 -A2 -S $149.99
K3 -A2 -S $449.99
K4 -A1 -S $549.99

About K2 Mounts
K2 Mounts is a leading provider of motorized and manual high -performance flat panel mounting solutions for home and commercial installations. Providing highly specialized mounting solutions for almost every conceivable installation and application, K2 Mounts products are backed by a free 10k component assurance and global support. For more information, visit www.k2mounts.com .
Source: K2 Mounts
Press Contact:
Jim Noyd
Noyd Communications Inc.
T: 310 -374 -8100
E: jim.noyd@noydcom.com

K2 Mounts
Tony Grasso
Tel: (605) 242 -5029
Email: tgrasso@k2mounts.com

Note for press only:
Photos, additional specifications, information, interview requests and product evaluations should be directed to agency.

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection