park in Spot

Parking aid that will help you park your car in the garage, the exact spot, (back, front, and sides). helps protect your car. Most accurate, easy to install. No batteries or electrical connection needed

Park in spot helps a driver park his car in a garage or another tight spot. Since it is very difficult for a driver to position a car in the right spot so that it is in the same position every time Park -In -Spot can be set to indicate where to stop the car so that the position of the car will be in the right spot on all sides of the car every time. The advantage of Park -In -Spot is that it does not require batteries or electricity to work and it is very simple to install and once installed, there is no maintenance.


Once the car is parked in the right position with the headlights on, position park in spot on the wall in front of the car to reflect the light so that it forms three rectangular shapes lined up to form one straight line. As the car moves away from the desired position, the line will be broken up and the three rectangular lines (shapes) will move up or down as three independent lines.

A straight line is formed and can be easily identified to indicate to the driver the right spot to stop the car and park.

Park -In -Spot can be used with all vehicles, in all garages or parking spots.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.