Tmanufacturing\'s ZAP products provide protection for the WGL Rain8 line and for standard controller

www.Tmanufacturing.com San Antonio Lawn sprinkler systems are becoming more sophisticated and “smart”. Susceptibility to lightning surge damage is reduced with the ZAP irrigation surge protection.

www.Tmanufacturing.com

San Antonio
With increasing water restrictions, rationing and conservation, lawn sprinkler systems are becoming more sophisticated and "smart", and with this sophistication in electronics comes an increase in investment and an increase susceptibility to lightning surge damage.

Tmanufacturing's ZAP products are designed to protect that investment by adding a barrier between your sprinkler controller and the valve wires that can act as an antenna for nearby lightning strikes.

The ZAP product line was originally designed for the WGL and Associates popular Rain8net sprinkler controller's computer port and valve connection, now offers a model for all WGL controllers and any standard sprinkler timer.

The ZAP not only provides surge protection, but also has fuse protection for 8 zones. In case of a valve or wiring short, the fuse opens to protect the controller and will remain "open" until the short is corrected, then automatically resets for normal operation. No fuses to replace.

Every mode also includes 8 LED -active valve indicators. At a glance you can see which zone is active during the watering cycle or while doing routine maintenance.

Tmanufacturing is a proud WGL distributer, manufacturer of their own products, and has a wide range of contract manufacturing services.

http://tmanufacturing.com/surgeprotection.html

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.