Simplehomenet to Release EZSwitch30 10/15/07

Simplehomenet will soon release its popularly awaited EZSWITCH30!

SIMPLEHOMENET 30011 Ivy Glenn Dr., Ste 123

Laguna Niguel, CA 92677
Phone (949) 429 -3303
Fax (949) 429 -8053
cheryl@simplehomenet.com
Press Release
Contact: Cheryl Smith
Phone: (949) 429 -3303 FOR IMMEDIATE RELEASE
9 A.M. PST, September 30, 2007
SIMPLEHOMENET TO RELEASE EZSWITCH30 10/15/07
LAGUNA NIGUEL, CA, SEPTEMBER 30, 2007: Simplehomenet will soon release its popularly awaited EZSWITCH30! They continue to march at a rapid pace of adding effective solutions into the integration of the sub -system appliances in your home.
WHAT IS THE EZSWITCH30?
EZSWITCH is part of a collection of Simplehomenet devices driven by consumer requests and shows Simplehomenet's commitment to deliver on the vision of the fully integrated home.
The EZSWITCH is a high current (30Amps) relay module that responds to INSTEON and X10 On/Off commands sent through the power line. The module contains dual relays with available normally -open or normally -closed contacts. Thus, it is possible to switch both legs of a 220VAC 2 -phase circuit, and control the load to be activated with either ON or OFF commands. Activating with OFF commands might be desirable in cases where a failure in the switch would leave the load energized.
EZSWITCH30 has a built -in power line interface and its programming control is done through the power line.
" The EZSWITCH30 has many energy saving applications. One very exciting possibility is for turning off heavy duty appliances, such as water heaters during peak demand hours"
- Cheryl Smith, Director of Marketing
Simplehomenet is a division of Compacta International, Ltd a Delaware corporation established in 1996. Compacta is resourced to quickly bring products to market and to provide excellent customer support.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.