TruAudio Bad Boys - Ultimate Performance InWall LCR

The new BadBoy series features truly state-of-the-art, In-Wall home theater speakers that will rival the finest cabinet speakers available.

B,B,B,B, Bad. B,B, Bad to Da Bone… the TruAudio Bad Boy Series - Now Shipping

SALT LAKE CITY, UTAH - July 15th, 2007 - Over the years dealers have supported TruAudio in their expanded product offerings. In fact, most new product introductions come directly or indirectly from dealer input. One statement that dealers told TruAudio is that, "we put your speakers all over a house, but would really like a VERY high performance InWall for the main Home Theater system". So, TruAudio decided to get Bad…

The Bad Boy Series are state of the art high performance speakers meant to be handle the demands of the most discriminating tastes as well as deliver powerful sound. They boast:
 A custom MDF enclosure that is put into the wall at the pre -wire stage. This allows the air space to be exactly the same in every installation, thus optimizing the performance and controlling the resonance.
 6 ½" Tru -Life™ Woven Carbon Fiber Midrange and Woofer Drivers, which is very stiff - limiting cone break up at lower frequencies, yet still providing smooth sound for voice and dynamic range.
 Four -layered voice coils for each driver: Since the Bad Boy's are designed to handle high volumes; dissipating thermal energy was a concern. To handle this, each driver features three voice coils instead of just one. These voice coils are also four layers opposed to the typical two. This gives the coils enough inductance to naturally limit the high frequency range, but also gives the woofers the additional weight needed to play low frequencies.
 1" Tru -Life™ Silk Dome Tweeter: Chosen for the Tru -to -Life sound character and dispersion patterns that also allows the tweeter to be played at higher volumes without the listener experiencing ear fatigue. This is especially important in home theaters where loud volumes are often played.
 Magnetically attaching cloth grills in black or white that attach seamlessly to either a silver or black face plate

The Top of the Line BB -465 LCR features three 6 ½ woofers & one midrange in cast aluminum baskets, a 1" neodymium, ferrofluid cooled tweeter, is rated at 5 -350 watts, 92 dB sensitivity and priced at $1,500 each retail. The BB -265 LCR ($1,000 each) is a smaller version of the BB -465, the BB265 WSUR ($1,000 each) is an InWall rear or side effect speaker and the BB -822 CSUR ($800 pair) is an InCeiling effects speaker.

Extreme Performance, World Class Materials, Design Oriented, - the TruAudio Bad Boy Series.

TRU believers in architectural speaker innovation, TruAudio designs and manufactures a full line of premium -quality custom audio products. Our engineers go to great lengths to make sure our in -wall, in -ceiling and outdoor loudspeakers blend into any background, yet deliver unforgettable performances. We sell our audio products only through a limited number of Certified TruAudio Dealers across the country. Each dealer meets our high standards for premiere customer service and flawless installation. TruAudio absolutely backs up every set of TruAudio speakers with a Lifetime Warranty.

# # #
Contact: Mark Cichowski - 949 -472 -4141 - Direct, 949 -472 -4141 Direct Fax
435 -986 -1574 - Main #, 435 -251 -9815 - Fax
439 North 3050 East, St. George, Utah 84790
E -mail: Web site:

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.