Induction Dynamics Unveils New SolidDrive Series at CEDIA Fall 2007

Induction Dynamics, an Overland Park, Kansas-based audio company, has created its second generation SolidDrive sound producer and will feature the new line at CEDIA.

High performance audio without compromising your interior design - It's Sound Without Speakers

Overland Park, Kan., August 1, 2007 - Induction Dynamics, an Overland Park, Kansas -based audio company, will unveil its second generation SolidDrive sound producer at CEDIA 2007, September 6 -9, at the Colorado Convention Center in Denver. SolidDrive SD1 is a cutting -edge, progressive, powerful sound transducer that transmits acoustical energy through almost any solid surface. The entire surface with which SolidDrive comes in contact becomes a speaker, delivering high -quality sound and the frequency response of conventional diaphragm speakers.

New SolidDrive technology from Induction Dynamics transforms common building materials such as drywall, glass and wood into high quality sound sources without the design challenge of traditional speaker placement. SolidDrive works on any rigid or semi -rigid surface, including walls, ceilings, floors, windows, mirrors, countertops, conference room tables and other furniture. Everything is hidden from view; there are no grilles, no visible wires and no speakers.

SolidDrive is patented technology using very high -powered neodymium magnets and dual symmetrically opposed motors to convert audio signals into powerful vibrations. Those vibrations are transferred into solid surfaces through direct contact. High -quality, full -range sound is then radiated from the entire surface with a frequency response of 60 Hz to 15 kHz.

This second -generation SolidDrive provides a greater level of clarity and much deeper bass than its predecessor, achieved with only one drive cylinder per channel to make installation extremely easy. And now, for the first time, audio system placement can be determined without altering a room's décor. SolidDrive blends seamlessly into any room's environment.

Induction Dynamics will feature this new line at the CEDIA EXPO 2007, September 6 -9, 2007, at the Colorado Convention Center. Visit booth #124 and sound room #9.

About Induction Dynamics

Induction Dynamics was founded in 1995 and is a sister company of MS Electronics, LLC. Corporate headquarters, manufacturing and distribution facilities are located in Overland Park, Kan.

Induction Dynamics designs and builds high -end loudspeakers with only the most select components and materials and utilizes numerous unique and proven technologies including exclusive, patented S4X driver -control technology, Wide Angle phase alignment technology, and patents for grille frame and fastener designs, corner mount and stud grabber systems, and excursion limiter technology.

Induction Dynamics' extensive line of high -end loudspeakers and the SolidDrive are available through a nationwide network of authorized dealers. (866) 663 -9770


Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection