HomeSeer's New HSM100™ Z -Wave® Multi -Sensor

HomeSeer Technologies release its new "HSM100" Z-Wave multi-sensor. The new device is designed to sense motion, temperature and light and works with all HomeSeer control products.

Bedford, NH - HomeSeer Technologies release its new "HSM100" Z -Wave multi -sensor. The new device is designed to sense motion, temperature and light and home owners can use the HSM100 to control up to 4 other Z -Wave devices directly. Those with HomeSeer -equipped homes can also use the HSM100 to trigger more complex automation events for whole house control of Z -Wave and non Z -Wave automation products.


"If our new HSM100 were only a motion sensor, it would rank among the best available. However, the addition of temperature and light sensors makes this a truly unique and versatile device", stated Mark Colegrove, HomeSeer's sales director. "With HomeSeer, information from each sensor may be used independently or in combination. The light sensor can prevent motion from lighting a room that is already well -lit. The temperature sensor can be used in areas of concern that aren't already monitored by thermostat."

Like other Z -Wave products, the HSM is completely wireless. The unit is based on the latest 300 series Z -Wave chip technology and offers outstanding performance. A built -in battery monitor may be programmed to alert HomeSeer users by email, phone or voice announcement when the battery needs to be changed.

HSM100 is designed to work seamlessly with Z -Wave products from industry leaders such as Cooper®, Leviton®, Intermatic®, Monster Cable® and ACT®.

HSM100 is slated to begin shipping in July, 2007.

For the past nine years, HomeSeer Technologies has been creating some of the most popular and robust automation systems available. HomeSeer Technologies' software and hardware controllers have been installed in over 11,000+ residential and commercial sites. HomeSeer has won numerous awards including TechTV's Best of CES, HomeAutomation top 50, TechLiving's HOT LIST, and was recently selected as a central integration component in all episodes of the hit FOX TV show "Renovate My Family". HomeSeer Technologies web site is HomeSeer.com.

About HomeSeer Technologies
HomeSeer Technologies is a leading provider of home control software based in Bedford New Hampshire. Our software and hardware controllers give users the ability to integrate and automate everything in their home, including lights, appliances, thermostats, audio/video, and media content. Our software is IP enabled, giving users remote access from anywhere in the world. Visit www.homeseer.com for more information.

# # #

PRODUCT LINK: http://store.homeseer.com/store/Z -Wave -Multi -Sensor -HomeSeer -P438C0.aspx

ARTWORK: http://www.homeseer.com/mdc/images/HSM100 -PR.jpg

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.