Wisdom Audio's New Digitally Controlled Analog Brain Now Shipping

The DCAB-1 Employs a PC-Based Interface and Room Analyzer that Allows Users to Refine a Myriad of Filter Characteristics to Optimize In-Room System Performance

CARSON CITY, Nev., June 20, 2007 - Wisdom Audio (www.wisdomaudio.com) has announced that its new Digitally Controlled Analog Brain (DCAB -1) is now shipping. This latest generation of electronic crossover, in -room analyzer, and equalizer is the ideal set up tool for optimizing the performance of any Wisdom Audio Adrenaline or Infinite speaker system.

"Moving beyond the adjustment and performance limitations of the original Brain, the DCAB -1 employs a PC -based interface and room analyzer that allows users to refine a myriad of filter characteristics to optimize in -room system performance," explained Tom Bohlender, Wisdom Audio founder. "Owners may now achieve a higher level of resolution in system refinement without requiring on -site factory personnel -even via remote control from their listening chair."

Employing a greater number of more powerful and precise filters, the DCAB -1 provides repeatable settings for simple comparison of any parameter. In addition to all the enhanced adjustment characteristics, the DCAB -1 is a significant step forward in overall transparency and dynamics as compared to Wisdom's earlier Analog Brain.

DCAB -1 features include:
• Remote Control; the DCAB -1 includes a remote control that communicates with the Brain bidirectionally. That is, unlike most remote controls, this one sends instructions to and receives information back from the main unit, displaying changes and status on its small screen.
• Real Time Analyzer with Microphone Input; the DCAB -1 incorporates a real time analyzer and calibrated microphone that is matched (via calibration) to a reference microphone.
• RS232 Interface; the RS232 interface is used to connect a computer for calibration and setup. It provides two -way communication between the DCAB -1 and the computer. The PC interface is used for adjusting all the parameters of the crossover/equalizer.
• Balanced Audio Inputs and Outputs

The DCAB -1 owner's manual provides critical information and advice for proper set -up, calibration, and speaker and microphone placement.

The DCAB -1 is a fourth -order constant -voltage crossover that provides both low -pass and high -pass outputs. The crossover network is implemented as a fourth -order state -variable filter. The slope of each output is 24 db/octave and the high -pass and low -pass outputs are always in phase with each other. All crossover work is done at the low (preamp) level and then distributed to the designated amplifiers, which reduces amplifier distortion by limiting the range of frequencies each amplifier must handle. The Active Brain allows for over 6,000 frequency adjustments allowing optimum performance of Wisdom speakers in virtually any environment. This is achieved via digital control of analog adjustments to the filter characteristics just prior to amplification.

"We are confident that any owner of an Analog Brain will be thrilled with the improvement wrought by the upgrade to the Digitally Controlled Analog Brain," Bohlender continued. "It all started for Wisdom Audio with the Adrenaline Series 11 years ago with the M -50 Monopole and the D -75 Dipole. Now, the new digitally controlled analog brain makes Wisdom Audio's product offerings second -to -none for those seeking nothing but the absolute best."

For more information, please visit www.wisdomaudio.com or call (775) 887 -8850.

# # #

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.