New AIM™ Cinema DiPole

SpeakerCraft, the world's leading manufacturer of custom installed loudspeakers, announces the AIM Cinema DiPole, a specialised rear-channel in-wall loudspeaker with a unique baffle design.

In the AIM Cinema DiPole, SpeakerCraft has created an in -wall speaker designed to reproduce the authentic surround ambience of commercial cinemas. It employs an innovatively -shaped, patented baffle and driver configuration to generate genuinely immersive surround effects with the décor -enhancing advantage of in -wall location. Each speaker has two 5 ¼ -inch woofers and two 1 -inch dome tweeters placed 50 degrees off -axis from each other. Two switch -able settings allow the speaker to operate either in bi -pole or dipole mode. In dipole mode there is a circuit to retain bass response, which would normally be lost by cancellation of the two woofers.


"The drivers are mounted in a baffle that has been carefully moulded with graceful curves and angles to avoid any sharp reflections" remarked Jeff Francisco, SpeakerCraft's Vice -president of Engineering. "The result is a piece of acoustic artwork that is impressive in both its style and its performance."

There are three AIM Cinema DiPole models. AIM Cinema DiPole One uses graphite woofers and silk tweeters and is timbre -matched with all One series speakers. AIM Cinema DiPole Three uses aluminium woofers and tweeters, has ±3dB of bass and treble adjustment and is timbre -matched with all Three series speakers. AIM Cinema DiPole Five uses Kevlar woofers, aluminium/magnesium tweeters, has ±3dB of bass and treble adjustment and is timbre -matched with all Five series speakers.

Availability: Immediate from your local stocking distributor.

SpeakerCraft, established in 1976, has for more than a decade devoted itself to the design and development of architectural loudspeakers and has become known as the prime OEM for many well -known in -wall speaker brands in the field. In marketing its own brand, now one of the widest lines of architectural speakers in the industry, SpeakerCraft brings with it years of experience and a dedication to dealer satisfaction.

For further information about SpeakerCraft and its products, contact Gary Vlaeminck, International Sales Manager, Tel: +1 -610 -570 -5433, or your local stocking distributor.

Visit SpeakerCraft: www.speakercraft.com or contact SpeakerCraft, Inc., at 940 Columbia, Riverside, CA 92507, USA. Phone: +1 -951 -787 -0543, Fax: +1 -951 -787 -8747.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.