New Recessed In -Wall Box by Sanus Systems holds/hides wall mounts

Recessed In-Wall Box (Model LR1A) allows a flat-panel TV to rest snuggly against the wall, hiding the mount in the process. This product is simple to install and fulfills a user's desire to have a TV flush with the wall with no visible wall mount.

Sanus Systems introduces Recessed In -Wall Box to hold/hide full -motion flat -panel wall mount


New in -wall box allows TV to be flush with wall so mount doesn't show.

(St. Paul, Minnesota) - Sanus Systems announces its new Recessed In -Wall Box (Model LR1A) that allows a flat -panel TV to rest snuggly against the wall, hiding the mount in the process. This durable, good -looking product is simple to install and fulfills a user's desire to have a TV flush with the wall with no visible wall mount. When used with Sanus Systems' VisionMount™ VM400 or LRF118 Wall Mounts, virtually any TV from 15' to 50' can be mounted so that the TV can be pulled out and pushed back, depending upon viewing needs. For instance, with use of the VM400 Full -Motion Flat -Panel TV Wall Mount, a medium LCD TV (15' -40') weighing up to 80 lbs. can be extended from 3.5' to 16.5' off the wall. The LRF118 Full -Motion Flat -Panel TV Wall Mount also extends from 3.5' to 16.5', and holds large LCD and plasma TVs (30' -50') weighing up to 130 lbs.

Model LR1A In -Wall Box is made of heavy gauge steel that provides incredible strength and rigidity. It is installed by cutting a hole in the sheetrock between wood studs and easily securing the recessed box to the studs with provided hardware. The In -Wall Box is available in a silver, black or paintable white finish. It features cutouts for signal and power cables. Model LR1A lists at $269.99 U.S.; $329.99 Canadian. It is currently available.

According to Keith Pribyl, vice president of retail sales for Sanus Systems, Model LR1A is a natural line extension for the dealer/installer. 'Our In -Wall Box is specially designed for ease and speed of installation, and it meets a consumer need that is perfect for the custom installer and home integrator to fill,' he said.

Sanus Systems designs and builds a broad variety of audio video furnishings, mounts and accessories that will satisfy even the most demanding audio/video enthusiast or interior designer. Every Sanus product is engineered to enhance both the A/V system and the surrounding décor. Today Sanus offers more than 300 products, including home theater units, TV stands, audio racks, wall mounts and speaker supports. Sanus products are available at thousands of retail locations worldwide; a store locator is available at www.sanus.com.


- 0 -

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection