Draper Offers GREENGUARD -Certified Fabrics on Window Shades

Draper is now offering GREENGUARD-certified fabrics on the company's entire line of FlexShade Solar Control Shading Systems.

Draper is now offering GREENGUARD -certified fabrics on the company's entire line of FlexShade Solar Control Shading Systems.


The GREENGUARD Environmental Institute™ (GEI) has established performance based standards to define goods with low chemical and particle emissions for use indoors, primarily building materials, interior furnishings, furniture, cleaning and maintenance products, electronic equipment, and personal care products.

Phifer SheerWeave® Series SW2000/SW2100 and Series SW2900/2600/2400 meet those standards, and are available on any Draper motorized, manual or battery -operated FlexShade.

GREENGUARD tests products for maximum emission levels required by the state of Washington's indoor air quality program for new construction, the US Environmental Protection Agency's procurements specifications, the recommendations from the World Health Organization, and Germany's Blue Angel Program for electronic equipment.

GREENGUARD Indoor Air Quality Certified Products meet the following minimum emission requirements: Individual VOCs: <0.1 Threshold Limit Value (TLV) industrial work place standard; Formaldehyde: 0.05 ppm; 4 -phenylcyclohexene: 0.0065 mg/m3; Total VOCs: 0.50 mg/m3; Total aldehydes: 0.1 ppm.

For more information, go to www.draperinc.com/moreinfo/windowshades/green.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.