BenQ Unveils Its First Full 1080p HD Digital Projector

Quiet, Bright HD Projector Designed for Home Cinema Enthusiasts

BenQ unveils its first full 1080p HD digital projector, the BenQ W10000. The new home cinema projector offers outstanding picture quality, optimized compatibility and advanced feature set. It has a sharp 10,000:1 contrast ratio, native 1920 x 1080 resolution, a high brightness of 1,200 ANSI lumen and BenQs proprietary Senseye(TM) technology. The Ben Q W10000 performs perfectly with various devices, such as media center systems, game consoles as well as high definition DVD and new Blu -ray players.


The W10000 arrives with a wide range of applications and instant setting options including cinema, home theater, family room, photo and gaming modes. Its also whisper quiet for undisturbed viewing.

The ultimate solution for home cinema enthusiasts, the BenQ W10000 is equipped with Advanced Continuous Electronic IRIS and DarkChip3(TM) DMD chipset with a high resolution projection lens for the best imagery possible. The Advanced Continuous Electronic IRIS increases the contrast ratio to a high 10000:1 while optimizing light intensity for bright or dark scenes. The DarkChip3(TM) DMD decreases light scattering and significantly boosts image contrast for dark scenes.

The W10000 has a MSRP of $9,999. and is available immediately through Home Theater distributors in the US.

Contacts:
BenQ America Corp
Alison Hau, 949 -255 -9466
Alison.hau@benq.com

or

Antarra Communications
Susan van Barneveld, 714 -891 -3660
pr.us@benq.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.