Compact Video Entry Phones in 5 Attractive Finishes

Viking's E-50 Series Video Entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication and color composite video of who is at your door or gate.

The E -50 Series Video Entry phones are compact, weather and vandal resistant speaker phones designed to provide two -way handsfree audio communication and color composite video of who is at your door or gate.


The E -50's compact size allows it to be mounted in a standard single gang electrical box. The E -50 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E -50 faceplates (PNL50) can be purchased separately and are available in all five standard finishes.

The E -50 entry phones can share a single phone line with house or small business telephones when used with a Viking model C -200 or C -2000A Entry Phone controller. The E -50 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K -1900 -5 auto dialer.

The E -50 features a built -in high resolution color video camera, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang -up when the call is completed.

Contact Viking Electronics for more information:

Phone: 715.386.8861
Email: info@vikingelectronics.com
Online: www.vikingelectronics.com

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.