NEW IN -CEILING SPEAKERS FROM TANNOY

Further developments to Tannoy's growing range of installation loudspeakers have resulted in two new in-ceiling models using proprietary point source drive unit technologies within a highly versatile and flexible 'eyeball' enclosure.

NEW IN -CEILING SPEAKERS FROM TANNOY


Further developments to Tannoy's growing range of installation loudspeakers have resulted in two new in -ceiling models using proprietary point source drive unit technologies within a highly versatile and flexible 'eyeball' enclosure. The CMS401e uses a 100mm (4.00") mineral loaded polypropylene ICT™ (inductive coupling technology) drive unit. The CMS401 DCe uses a high powered and wide bandwidth 100mm (4.00") Dual Concentric™ driver which combines a multi fibre paper pulp LF cone and a titanium domed HF unit with a neodymium magnet system. Perfect for this type of application, both point source driver systems generate a spherical wave front unaffected by energy loss at the crossover frequency in either vertical or horizontal planes. Manufactured from UV / weather resistant UL94V -0 ABS material, the injection moulded pod can be swivelled 25° in any direction within its ceiling mounting ring allowing precise targeting of the sound towards the desired area of coverage. The cleverly designed clamping system facilitates fast, simple and cost effective installation and adjustment. Once the exact angle of the 'eyeball' is established the unit can be clamped securely to permanently maintain that position. However, if required, further readjustment of the system is also possible. In addition to low impedance operation, each unit includes a premium quality Tannoy THP30 multi -tap transformer for distributed -line systems. The versatility of the CMS401 speakers will satisfy a wide assortment of foreground music or paging system applications such as retail environments, office buildings, airports and hotels through to home theatre or residential multi -room stereo systems.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.