New Gefen Extender Transmits Both Digital and Analog Audio With DVI HD Video

The newest HDTV extension solution from Gefen enables digital video computers and HD sources equipped with DVI to be extended up to 45 meters together with both digital and analog audio.

A benefit for anyone needing HD video plus audio on the receiving end, the Gefen DVI Audio Extenders provides several inputs and outputs for audio on its sender and receiver transmission system.


One DVI input/output is provided for HD digital video in resolutions up to 1080p or 1920x1200 for computers. Since DVI carries video only, TOSlink and S/PDIF digital audio ports are provided together with analog RCA stereo ports.

Two CAT -5 cables are used to send all connected audio/video components from the sender to the remote receiver, connected to the HDTV display and audio receivers.

The system works on a plug and play basis, requiring no additional hardware or software to operate.

Ideal for presentations, digital signage and in -store displays, Gefen's DVI Audio Extender promises a high level of audio and video quality on the receiving end.

The unit comes with one six foot DVI cable and one six foot audio RCA cable in addition to two power supplies that drive the system.

Gefen's DVI Audio Extender may be purchased through one of Gefen's resellers located throughout Asia and listed online at http://www.gefen.com/dealers/asia.jsp.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.