Gefen Shows Interface Adapters for Connecting Legacy and Digital Equipment to HDMI at IS China

Two new conversion solutions from Gefen provide convenient solutions for audio/video systems using multiple digital and/or analog interfaces.

The DVI/Digital Audio to HDMI Conversion Box supplies a plug -and -play method of connecting a HD digital video source, including computers, together and any digital audio device to an HDMI display. High definition resolutions up to 1080p are supported and multichannel digital audio is delivered with no degradation or downtime.


The Component/Analog Audio to HDMI Conversion Box enables component video sources and any accompanying audio devices to feed into an HDMI display. Both video and audio are delivered to the display using the single HDMI interface, allowing for flexibility in connecting disparate components when upgrading to a new HD digital video display.

Both of Gefen�s Conversion Boxes perform a valuable role in integrating different audio/video components with a high -quality conversion capable of sustaining the highest resolutions possible. Each comes in a single box, accompanied by the appropriate connector cables and an external power supply that feeds the system conversion.

Expected to begin production in April 2006, Gefen's HDMI conversion solutions will be available for purchase through Gefen's resellers, listed online at Gefen.com.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.