Pass & Seymour Occupancy Sensors Offer Energy -Efficient Lighting

P&S Wall Box Occupancy Sensor is a commercial decorator product. Automatic "on" and "off" functions, light level adjustment of 10-150 footcandles, and 2-level fresnel lens for near- and far-sighted abilities. Colors: ivory, light almond, white, gray.

FOR IMMEDIATE RELEASE


FROM: Pass & Seymour/Legrand
P.O. Box 4822
Syracuse, NY 13221

CONTACT: Cookie Caloia
(315) 468 -8400
Fax (315) 468 -8009

AGENCY:Eric Mower and Associates
Syracuse, NY 13204

CONTACT:Carri Gregorski
(315) 413 -4286
cgregorski@mower.com

PASS & SEYMOUR/LEGRAND® INTRODUCES NEW WALL BOX OCCUPANCY SENSORS

SYRACUSE, N.Y. (April 10, 2006) - Pass & Seymour/Legrand (P&S), a leading manufacturer of electrical wiring devices and home systems, today unveiled its new WSP200 Wall Box Occupancy Sensor. Its superior style complements the full line of P&S commercial decorator products.

The WSP200 Occupancy Sensors will replace the current WS3000 Occupancy Sensor. The WSP200 offers automatic "on" and "off" functions, with a light level adjustment from 10 to 150 footcandles. Installation is quick and easy, with a grounded strap and screw terminations. The Occupancy Sensor features a reinforced lens, which provides ruggedness and durability. A 2 -level fresnel lens gives the Sensor near - and far -sighted abilities.

"These new Sensors offer substantial improvements over the WS3000, but they're identical in operation and installation," said Nancy Pedersen, product manager at P&S. "There's no learning curve for electrical contractors and distributors."

The WSP200 offers dual 120/277V operation and comes in ED boxed versions of ivory, light almond, white and gray.

For more information about the WSP200 Occupancy Sensor, contact your P&S representative or visit the company's Web site at www.passandseymour.com.

Pass & Seymour/Legrand is a leading provider of electrical wiring devices, accessories and home systems in North America. For more information, call
1 -800 -223 -4185 or visit www.passandseymour.com.

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.