GEFEN SENDS HD VIDEO PLUS DIGITAL AND ANALOG AUDIO OVER CAT -5 CABLES

The DVI Audio Extender supports DVI (digital visual interface) components capable of transmitting HD video in resolutions up to 1080p or 1920x1200 for computers.

ANAHEIM, CA - Leading digital video solutions provider Gefen released its newest DVI Extender, designed to support the extension of both digital and analog audio in addition to HD video up to 150 feet.


The DVI Audio Extender supports DVI (digital visual interface) components capable of transmitting HD video in resolutions up to 1080p or 1920x1200 for computers. Audio, which is not supported by the DVI format, is sent using digitally based S/PDIF or analog stereo audio formats. For computer users, DDC signals are sent along with the audio for external control.

Two industry -standard CAT -5 cables connect the DVI Audio Extender's sender and receiver units. Up to 150 feet in distance is guaranteed, effectively surpassing the 15 -foot limitation imposed by the DVI specification.

Gefen's sender and receiver units are powered by an external supply that can be connected at the local or remote location, providing flexibility in the system setup. All connector cables are included as well.

The Gefen DVI Audio Extender (MSRP $649) is currently available to order online at Gefen.com or through an authorized Gefen reseller.

About Gefen:
A leader in the high definition digital domain, Gefen delivers advanced technologies with multi -platform extension, switching, distribution and conversion capabilities. Gefen equipment is utilized all over the world in professional AV/IT and consumer electronics/home theater environments. Their add -on hardware maximizes system functionality and enhances operability by enabling AV systems to go beyond their original functionalities. A selection of high quality cabling is also available. Additional information may be found at www.gefen.com.

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection