Never Come Home to a Dark House

Lighting scenes can be activated using key fobs or just about any other input device. Used as outputs, EDT contact closures can control blinds, garage doors, and many more household devices.

EDTNewsletter

Volume 2, Number 9
October 25, 2005

Never Come Home to a Dark House

EDT's contact closure modules put lighting controls at your fingertips with
remote key fobs, motion detectors, and more.
Activate your doorway lights with a
standard motion detector or with your doorbell by connecting to an EDT contact
closure. When the doorbell is pressed or when motion is detected, the contact
closure closes turning on EDT switches and illuminating dark stairwells,
walkways, and unwelcome visitors.

Or trigger a welcome home lighting scene with a wireless key fob remote so that
you never come home to a dark house again. Lighting scenes can be activated
using key fobs or just about any other input device. Used as outputs, EDT
contact closures can control blinds, garage doors, and many more household
devices.

Electronic Design Technology (EDT) contact closure modules are used in any low
voltage sensor -relay combination as inputs to trigger lighting scenes. Or they
can be used as outputs to control low voltage electronic devices.

Contact closures connect to the i -LiNE network using UL listed CAT5e cable. The
CAT5e cable provides power and communications to the contact closure. Standard
two or four conductor cable can be used to connect sensors or low voltage
electronic devices to the contact closure. (Check with the manufacturer whether
your device can be controlled with a contact closure.)

Use an i -PoWER -M4t module to take advantage of i -LiNE scene timers. Auto -off
scenes can save energy dollars by turning off unused lights for you.

EDT contact closures come in single and four port modules and are rated for 30
volts DC or 30 volts AC. Single port modules are available in one amp and ten
amp models. Four port modules come in one amp, ten amp and mixed
one -amp/ten -amp models. See the installation manual for wiring and programming
details.

EDT load control products include 600 Watt ON/OFF Relay switches and 600 Watt
dimmer switches which are part of a distributed lighting control system called
i -LiNE featuring energy savings up to 35%. For more information please visit our
website at http://www.edt.biz or contact our sales department at (903) 753 -4180.

Electronic Design Technology 707 North Green Street Longview, Texas 75601
Phone: (903) 753 -4180 Fax: (903) 753 -4811 http://www.edt.biz

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.