Artison's Introduces Its First In -Wall Surround

Artison Creates a Unique In-Wall Speaker

Incline Village, NV - September 27, 2005 - Artison has taken its popular LRS high performance surround speakers and created a unique in -wall speaker that has all of the performance of the surface mount LRS and the stealth of an in -wall speaker. Unlike other in -wall surrounds, the LRS -IW is a complete speaker cabinet mounted inside an in -wall mount. It does not rely on the cavity created behind the baffle to control the performance of the system. The sound is consistent and fully independent of the environment. Artison's unique hybrid acoustic design is Monopole below 3 KHz where you want "Steering Ability" for action and reality scenes and Dipole above 3 KHz where you don't want to be able to locate the source of the sound. This small, affordable, high performance surround can without doubt impress the most critical customer. The LRS -IW measures 10.25"H x 15.5" W x 3.5' D and will install in any standard 2" x 4" wall where studs are 16 inches on center. LRS -IW has an MSRP of $700.00 per pair.



Artison's LRS -W On -Wall Surround Satellite speakers are designed with the same high -quality components and engineering as the front speakers, providing a vivid, realistic surround experience. Measuring 9" H x 9 -1/2" W x 3" D, the surround speakers are housed in cabinets in a choice of black or white ABS, the latter of which may be painted to blend with any room décor. Wall brackets are included for easy installation. The MSRP for the LRS -W On -Wall Surround Satellite speakers is $500.00 per pair.



About Artison



Artison is dedicated to the development of new audio and video applications designed to meet the technology needs of the 21st century. The company is headquartered at 774 Mays Boulevard, Suite 10 -183, Incline Village, NV 89451, phone 775 -833 -4344, or visit the Artison Web Site at www.artisonusa.com.



# # #


Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.