NEW DVI PRODUCTS OFFERED FROM TV ONE

Five new components from TV One are now shipping that ideal for use in high-definition home theatre systems and PC-compatible for general computer use.

FOR IMMEDIATE RELEASE


Contacts:
Gregory A. DeTogne
Gregory A. DeTogne Public Relations
847 -367 -8187
greg@detogne.net

NEW DVI PRODUCTS OFFERED FROM TV ONE TV One -task™ family expands to reach new markets

ERLANGER, KY, August 15, 2005 -Ideal for use in high -definition home theatre systems and PC -compatible for general computer use as well, five new components from TV One are now shipping that extend the range of DVI signals and offer a versatile number of display options. Part of the TV One -task™ product group, the devices are all fully HDCP compliant, and collectively join to form the 1T -DVI Series.

Central among these new offerings is the model 1T -DVI -RH DVI Repeater. Capable of sending any high -definition signal 40 feet or more using premium cable, the unit eliminates signal degradation by completely rebuilding and amplifying all digital video input. Its reach can be extended even further by using TV One's Z -Plus ZD -1813 Super High -Resolution DVI Cable, and up to three of the repeaters can be cascaded to conquer extremely long distances.

Next among TV One's new DVI products are the 1T -DVI -512 and 1T -DVI -514 DVI distribution amplifiers. Capable of taking the sum of a single input and respectively providing two and four outputs without any degradation or loss of original quality, the distribution amps are ideally suited for sending a single -source DVI signal to multiple displays.

Conversely, viewing multiple DVI signals on a single display is just as easy thanks to the 1T -DVI -721 and 1T -DVI -741 DVI routing switchers. With the former ready to accept two inputs and the latter accepting four, both switchers maintain video signal quality throughout the process by passing vital HDCP information from the selected source along to the output. Video input selection is offered via front panel controls on either unit, or IR remote control. To facilitate applications requiring that the switchers be hidden from view, an IR remote receiver is also offered.

All five of the new TV One DVI products meet FCC and CE standards, and are EDID and DCC compliant. Not much larger than a standard AC plug, TV One's exclusive micro -power adapter can also be used with each, while a locking DC -power connector guards against accidental loss of power during operation.

Suggested retail prices for the new TV One -task 1T -DVI Series products are $249 for the 1T -DVI -RH DVI repeater, $299 and $399 respectively for the 1T -DVI -512 and 1T -DVI -514 DVI distribution amplifiers, and $249 and $349 respectively for the 1T -DVI -721 and 1T -DVI -741 DVI routing switchers.

From TV One, 1350 Jamike Drive, Erlanger, KY, 41018, 800 -721 -4044, 859 -282 -7303, www.tvone.com.

###

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.