ANTHONY GALLO ACOUSTICS RELEASES REFERENCE 3 SUBWOOFER AMPLIFIER

Anthony Gallo Acoustics will display its all new Reference 3 Subwoofer Amplifier at CEDIA 2005

FOR IMMEDIATE RELEASE


ANTHONY GALLO ACOUSTICS RELEASES NEW
REFERENCE 3 SUBWOOFER AMPLIFIER
New Unit Features Bridgeable Stereo Amplifier and Dual Channel Active Crossover to
Control Multiple Passive Subwoofers from a Single Location

CHATSWORTH, CA, July 27, 2005½Anthony Gallo Acoustics announces the release of its Reference 3 Subwoofer Amplifier (SA), a high -end audio component that features a bridgeable stereo amplifier, a high -quality active crossover and a sophisticated equalization circuit in one single chassis. The numerous control settings allow a user to control and fine tune multiple passive subwoofers, making it perfect for custom installations. When used in its mono feature the Reference 3 SA can generate 600 watts RMS.

"We meticulously designed and manufactured the Reference 3 SA to be a unique, multi -functional amplifier and controller for numerous passive subwoofers," states Anthony Gallo, founder of Anthony Gallo Acoustics. "Normally, you½d have to be running around the room back and forth trying to get your subs just where you want them, but with the Reference 3 SA, you can tweak your bass sound from one location."

Unlike many amplifiers, the new Reference 3 SA features dual phase controls, which allow for independent adjustment of the subwoofers. The Reference 3 SA is stable down to two ohms in stereo and four ohms in mono (when bridged). In addition, the unit features some recessed controls that require a screwdriver for making adjustments. This is done to prevent others from altering any carefully calibrated settings.

The Reference 3 SA also includes a continuously variable EQ cut/boost from ½3dB to +6dB, which can be employed to extend bass response of AGA½s Reference 3 speaker to 22Hz. This results in true, no -compromise subwoofer bass in full stereo.

About Anthony Gallo Acoustics:
Anthony Gallo, who created his first loudspeaker at the age of 14, has been raising the bar in loudspeaker design for more than 25 years. He formed Anthony Gallo Acoustics (AGA) in the early 1990½s in order to bring his creations to the marketplace. His first commercially available product, the Nucleus Solo loudspeaker, went on sale in 1994. The speaker, which contained the unique blend of creative industrial design and top -quality sound components that quickly became an AGA trademark, was an immediate success. Today, AGA½s products are sold in over 40 countries, including a complete line of stereo speakers, home theaters speakers & systems, powered subwoofers and installation accessories to complement their award -winning speaker systems.

For more information visit: www.roundsound.com

Media Contact:
Micah Warren, Principal
FeverPitch Media Group, LLC
(201) 945 -1984
micahw@feverpitchmedia.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.