TeleEye DM368 Outdoor Vandal Resistant Pan/Tilt Dome Camera

With its auto patrol operations and high panning and tilting speeds of up to 50º per second, the TeleEye DM368 provides a complete all-round vision to your business and asset.

TeleEye DM368 is an alternative for price sensitive surveillance applications requiring wide coverage protection. With its auto patrol operations and high panning and tilting speeds of up to 50º per second, the TeleEye DM368 provides a complete all -round vision to your business and asset.


The user -friendly and cost -effective dome camera has a 1/3" high sensitive interline transfer CCD and delivers resolution image with 350 TV lines and 0.5 lux light sensitivity. The TeleEye DM368 supports up to 64 preset positions and 1 patrol sequence which provides you with active and wide coverage surveillance. Its accurate response ensures targets are easily to be located and tracked.

Equipped with polycarbonate cover and metallic housing, the TeleEye DM368 is vandal resistance and provides optimal protection on outdoor environment and tough operating condition. The dome camera also meets international IP66 standard for dust and water resistance. The TeleEye DM368 is easily to install, control and direct.

With built -in RS -485 telemetry interface, TeleEye 368 supports protocols like TeleEye and Pelco -d. In addition, it is fully compatible with TeleEye video Transmitters in remote surveillance applications. Users can remotely control the pan/tilt of TeleEye DM369 to access video for immediate action.

The TeleEye DM368 also incorporates other strong features including auto tracking white balance, electronic shutter control, back light compensation, OSD menu and password protection.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseTâ„¢ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.