TZX 08

8 x 8 audiovideo matrix and infrared router for home applications.

TZX08 is an audio video matrix and infrared router, destined to home theatre applications. Equipped with 8 inputs and 7 outputs and a preview, the audio video sources and infrared bus can be routed simultaneously or separately.

The preview output, equipped with a monitoring loudspeaker in the front of the device and with a video output planned for the connection of a small control monitor, enables to command directly the picture and the sources sound level and the outputs without going in the rooms where they are diffused.
Every audio output is adjustable, either by the front panel controls equipped with LCD control, or by plug RS 232 series or even by infrared link.
The routing of the infrareds give the possibility of relocating the control from any source : DVD, satellite decoder or even remote video cassette recorder. Control can be carried out from the infrared remote controls, or infrared wall mounted remote control as Tac Vimaty or other connected to the infrared inputs commonly called area (the area is the room where the sound and the image are diffused and from which the remote control of the sources by infrared is done).
TZX 08 is a really nice solution for display and audio routing multiroom apllications in house or in professionnal places like department stores, multimedia stores, hall of buildings, …

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.