SPEAKERCRAFT'S NEW IN -WALL AIM LCR SPEAKERS ARE THE IDEAL COMPLIMENT FOR PLASMA TVs AND LCDs

In-Wall AIM LCR Series Features Pivoting Dual Woofers and Pivoting Tweeters

RIVERSIDE, CA: JANUARY: 2005 SpeakerCraft, America's original manufacturer of in -wall speakers, announces two new in -wall AIM LCR speakers, each with woofers and tweeters that are fully aimable for acoustic accuracy to critical listening areas. Both models feature the superior frequency response and power handling needed for home theater and can be used for front left, right and center channels as well as rear surround channels.


"Building on the award -winning AIM LCR Series of fully pivoting in -ceiling speakers, the new AIM LCR in -wall series brings speaker technology to yet another level." Commented Jeff Francisco, SpeakerCraft's V.P. of Product Development, "With the popularity of thin on -wall displays customers have demanded that the audio in their systems keep up with the dramatic improvement in the visual presentation. The AIM LCRs discretely integrate into the home theater and through their unique proprietary features allow the home theater audio to be its best. The in -wall AIM LCR models allow both woofers and tweeters to be accurately directed to the listening area, all while remaining discretely hidden behind a flush mounted grill."

AIM LCR speakers can be used in any position of a home theater speaker system. A single AIM LCR can be used for the front center channel, or a pair can be used for front or rear left and right. Because the AIM LCR speakers are magnetically shielded, its perfectly safe to place them close to the television.

The AIM LCR One (MSRP $499 per pair) features dual 5.25 injection molded graphite cone woofers with phasing plugs and 1" silk dome tweeters. It's power handling is 80 watts and frequency response is 45Hz to 20Hz + 3dB. The AIM LCR Three (MSRP $999 per pair) features dual 5.25 aluminum magnesium cone woofers with phasing plugs and 1" aluminum magnesium dome tweeters. It's power handling is 100 watts and frequency response is 40Hz to 20Hz + 3dB.

SpeakerCraft, established in 1976, devoted itself for more than a decade to the design and development of architectural loudspeakers and became known as the prime OEM for many well -known, in -wall speaker brands in the field. In marketing its own brand, now one of the widest lines of architectural speakers in the industry, SpeakerCraft brings with it years of experience and a dedication to dealer satisfaction.

For further information about SpeakerCraft and its products, contact Leslie Stevens of Eclipse Marketing at eclipsemarketing@cox.net. Phone: (949) 363 -5340. You may visit SpeakerCraft on their website at www.speakercraft.com. Or contact SpeakerCraft, Inc., at 940 Columbia, Riverside, CA 92507. Phone: 800 -448 -0976, Fax 909 -787 -8747.

# # #

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.